表面粗糙度比較樣塊

Comparison Sample Block of surface Roughness

用途：

     表面粗糙度樣塊是以比較法來檢查機械零件加工表面粗糙度的一種工作量具。通過目測或放大鏡與被測加工件進行比較，判斷表面粗糙的級別。

APPLICATIONS:

       Comparison Sample Block of surface Roughness is a measuring tool which is sued to check the smooth finish of a mechanical workpiece by comparision method and eye estimation or microscope is used to compare an detect the degree of the surface roughness.

要素“

規格：共分四種

WH.01-HY-1七組樣塊（車床、刨床、立銑、 平銑、平磨、外磨、研磨）

WH.01-HY-2六組樣塊（車床、立銑、 平銑、平磨、外磨、刨床、）

WH.01-HY-3筆記本樣塊（車床、立銑、 平銑、平磨、外磨、研磨）

WH.01-HY-4單組形式（車床樣塊、刨床樣塊、立銑樣塊、 平銑樣塊、平磨樣塊、外磨樣塊、研磨樣塊）

FEATURES:

Specification :Dibided into four kinds

WH.01-HY-1 Sample block of seven sets（turning shaping vertical milling plain milling plain grinding extermal gringding polishing）

WH.01-HY-2 Sample block of six sets（tuting vertical milling plain ain milling plain grinding extermal gringding polishing））

WH.01-HY-3 Notebook Sample block（tuting vertical milling plain ain milling plain grinding extermal gringding polishing））

WH.01-HY-4 Sample block of single sets（Sample block of turning shaping vertical milling plain milling plain grinding exterimal grinding polishing）

分類及粗糙度參數如表

Classify and rough degree parameter table

a 七組樣塊（Sample block of seven sets）：

B筆記本樣塊（Notebook Sample Block）

     在通用的“AA”值中，筆記本樣塊包含了六種zui重要的機械加工方法的樣塊標準。所有30種樣本都在u”AA（算數平均值）中和等同于umRa的公制中校準。表面粗糙度的比較范圍按如下表格中數據進行：、

Notebook sample block contains standards for the six most important maching methods in the prevalent “AA”values All 30specinments are calibrated in “uAA（Arithmetical Average）and in the metric equivalents um ra surface roughness comparison scale are available in the following sets: