GPS天線分配器 LNFA1X4
具體成交價以合同協議為準
- 公司名稱 上海汀江電子科技有限公司
- 品牌
- 型號
- 產地
- 廠商性質 生產廠家
- 更新時間 2016/9/10 19:00:38
- 訪問次數 449
產品標簽
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
主要產品包括同軸固定衰減器，連續可調/步進衰減器，程控衰減器，同軸負載，失配負載，移相器，定向耦合器，同軸開關，檢波器，功分器/合路器，環行器/隔離器，集成衰減器/高功率電阻，各類轉接頭，測試電纜等多個產品系列。
L N F A 1 X 4
Technical Product Data
Features
• Unity Gain
0 ± 1dB
• High Isolation Outputs
> 45 dB Port-to-Port Isolation
• Low Noise Figure
< 4 dB
Description
The LNFA1X4 Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. The device features a low noise input section to establish an overall system noise figure. Excellent port-to-port isolation and unity gain are achieved by padded outputs. The device features excellent frequency selectivity around the L1 band to prevent interference from other high power radio frequency sources, such as cellular transmitter stations. The LNFA1X4 device will power itself and an external GPS antenna from a 5.0 VDC source connected on any of the RF Outputs. A “hunt-and-pick” circuit is used to select only one DC input for power in the event that more than one source is connected. Remaining DC inputs are switched to a 200Ω resistor to simulate antenna current draw.
Performance
LNFA1X4:
Input SWR （Ant. Port） and Frequency Response: Ant. to J1, J2, J3, and J4 （Typical）:
REV. A 07/11/07 2
LNFA1X4:
Output S11 （J1, J2, J3, J4） and Adjacent Output Isolation （J1-J2, J3-J4） （Typical）:
Mechanical
Dimensions: Height: 1.3”
Length : Body: 6.75”
Base Plate: 7.5”
Width: 2.5”
（not including connectors）
Weight: 20.6 oz （578 grams）
Operating Temp. Range: -40oC to + 85oC
REV. A 07/11/07 3
Technical Product Data
Features
• Unity Gain
0 ± 1dB
• High Isolation Outputs
> 45 dB Port-to-Port Isolation
• Low Noise Figure
< 4 dB
Description
The LNFA1X4 Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. The device features a low noise input section to establish an overall system noise figure. Excellent port-to-port isolation and unity gain are achieved by padded outputs. The device features excellent frequency selectivity around the L1 band to prevent interference from other high power radio frequency sources, such as cellular transmitter stations. The LNFA1X4 device will power itself and an external GPS antenna from a 5.0 VDC source connected on any of the RF Outputs. A “hunt-and-pick” circuit is used to select only one DC input for power in the event that more than one source is connected. Remaining DC inputs are switched to a 200Ω resistor to simulate antenna current draw.
ElectricalSpecifications,TA=250C
| Parameter | Conditions | Min | Typ | Max | Units |
| Frequency | Ant–AnyOutput | | 1.5754 | | GHz |
| In/OutImped. | Ant,J1,J2,J3,J4 | | 50 | | Ω |
| Gain | Ant–AnyOutput | -1 | 0 | +1 | dB |
| InputSWR | Allports-50Ω | | | 2.0:1 | - |
| OutputSWR | Allports-50Ω | | | 1.3:1 | - |
| NoiseFigure | Ant–AnyOutput | | 3.8 | 4.2 | dB |
| Selectivity | ±50MHz,Ant–AnyOutput | 40 | 45 | | dB |
| AmplitudeBalance | Ant–AnyOutput | | | 0.5 | dB |
| PhaseBalance | Phase（J1–J2,J3,J4）;Ant–Any Output,UnusedOutputs- 50Ω | | | 1.0 | deg |
| Isolation | AdjacentPorts,Ant-50Ω（seeplots） | 45 | 50 | | dB |
| Req.DCInputV. | DCInputonAnyRFOutput | 4.8 | 5.0 | 5.2 | Vdc |
| Current（1） | AmplifierCurrent,Allports-50Ω | | | -9.6 | mA |
（1）InputDCCurrentonanyRFoutputport.（Doesnotincludeantennacurrent）
Performance
LNFA1X4:
Input SWR （Ant. Port） and Frequency Response: Ant. to J1, J2, J3, and J4 （Typical）:
REV. A 07/11/07 2
LNFA1X4:
Output S11 （J1, J2, J3, J4） and Adjacent Output Isolation （J1-J2, J3-J4） （Typical）:
Mechanical
Dimensions: Height: 1.3”
Length : Body: 6.75”
Base Plate: 7.5”
Width: 2.5”
（not including connectors）
Weight: 20.6 oz （578 grams）
Operating Temp. Range: -40oC to + 85oC
REV. A 07/11/07 3
采購中心
化工儀器網