化工軸流泵 進口化工軸流泵  德國進口化工軸流泵Chemical axial flow pump

化工軸流泵概述

化工軸流泵參照升力線理論，吸取螺旋槳設計的經驗，發展了沿徑向變環量分布的軸流泵設計方法，并進行了廠內的模型試驗，與同類相比，重量輕，體積小，剛性好，效率高等特點。
主要應用于大流量、低揚程的場合，特別適用于制鹽、制堿的強制循環系統之中。

化工軸流泵結構特點
     1、轉速低，一般轉速在980r/min以內，符合結晶工藝要求運行平穩. 
     2、水力性能優異，效率 〉70%高效區寬，抗汽蝕性能好. 
     3、考慮泵介質流動方向?yàn)榇怪毕蛳逻M(jìn)，水平方向出。水流作用力對泵軸的巨大影響，在泵**增設了泵軸外套保護裝置。使介質的俯沖作用力轉移到泵體上，從而保證了泵的運行穩定，大大減輕了介質對機械密封作用力的影響，延長了機器封使用壽命。該結構的改進在國內同類產品中邁出了較大的一步。另外泵體采用整體式鑄造剛性好，中間支承結構聯結穩定. 
     4、 軸承箱部位為方型長跨距重型結構，穩定性好，承載能力強，運行可靠，與國內同類產品相比安裝方便精確（原國內軸承箱為分體式）。前后兩端分別采用徑向短圓柱軸承和重型成對軸承。其軸承均采用INA（SKF）或優質軸承. 
     5、 封軸*，采用副葉輪動力密封和博格曼快裝式雙端面機械密封組合，外接冷卻沖洗水，改善軸封工作條件，機封壽命長。軸套外圓加大，與國內同類產品相比壁厚加厚變形小.

    密封腔處的徑向振擺小于0.05mm，保證了密封的可靠性和耐久性，延長了維修周期?？砂惭b填料密封和單端或雙端機械密封，并可安裝動力密封以供特殊場合使用。

化工軸流泵用途：
應用于大流量、低揚程的場合，特別適用于制鹽、制堿的強制循環系統中。
   
化工軸流泵性能參數

流量：300-1100m3/h
揚程: 3.5-8.5m
壓力：100PSI
溫度：≤170°C

化工軸流泵材質

所有過流部件均采用SS304、SS316、0Cr20Ni25Mo3Cu2、 Incolloy 825、Monel、400、904L、316L。
5 旋向 
從驅動端看，泵按逆時針方向旋轉。

Chemical axial flow pump inlet chemical axial flow pump imported from Germany pump axial flow pump Chemical axial flow
Overview of chemical axial flow pump
Hzw according to lifting line theory, draw propeller design experience, the development of the design method of axial flow pump with variable circulation distribution along the radial direction, and the model test is carried out and compared with the similar, light weight, small volume, good rigidity, high efficiency.
The utility model is mainly applied to the occasions of large flow rate and low lift, and is especially suitable for the forced circulation system of salt making and alkali making.
Structural characteristics of axial flow pump
1, low speed, the general speed of less than 980r/min, in line with the requirements of the crystallization process running smoothly
2, excellent hydraulic performance, efficiency of the 70% high efficiency area, good anti cavitation performance
3, taking into account the direction of the flow of the pump into the vertical downward direction, the horizontal direction. The huge influence of the flow force on the pump shaft, and the pump shaft is additionally provided with a protective device for the shaft cover of the pump. So that the medium of the subduction force transferred to the pump body, thereby ensuring the stable operation of the pump, greatly reducing the effect of the medium on the mechanical seal force, extending the service life of the machine seal. The improvement of the structure has taken a big step in the domestic similar products. In addition, the pump body adopts the integral casting rigidity, and the middle supporting structure is connected stably
4, the bearing box for the square long span heavy structure, good stability, bearing capacity, reliable operation, compared with the domestic similar products to facilitate the installation of precision (the original bearing box for split type). The front and rear ends are respectively provided with a radial short cylindrical bearing and a heavy pair bearing. The bearings are INA (SKF) or international quality bearings
5, sealing the axis of advanced, the use of auxiliary impeller power seal and Bergman fast mounted double face mechanical seal combination, external cooling water, improve the shaft seal working conditions, machine seal life is long. The outer circle of the shaft sleeve is enlarged, and the wall thickness is thicker and the deformation is small compared with the domestic similar products
The radial vibration of the seal cavity is less than 0.05mm, which guarantees the reliability and durability of the seal and prolongs the maintenance period. Packing seal and single or double end mechanical seal can be installed and can be used for special occasions.
Chemical axial flow pump:
The utility model is suitable for the occasions of large flow and low lift, and is especially suitable for the forced circulation system of salt making and alkali making.
Performance parameters of axial flow pump
Flow: 300-1100m3/h
Lift: 3.5-8.5m
Pressure: 100PSI
Temperature: less than or equal to 170 DEG C
Chemical axial flow pump material
All the over-current components are SS304, SS316, 0Cr20Ni25Mo3Cu2, Incolloy 825, Monel, 400, 904L, 316L.
5 direction of rotation
From the driver side, the pump rotates counterclockwise.

Sales Hotline:

Service