S3火花直讀光譜儀配置:                                                                                                                                                         

1. 光學系統 / Optical System
2. 元素譜線 / Elements Spectral Lines
3. 控制、采集和讀出系統 / Control, Acquisition and Read out System
4. 火花源 / Spark Source
5. 火花臺 / Spark Stand
6. 軟件 / Software
7. 控制中心：電腦 / Control station : computer
8. 尺寸 / Dimensions
9. 電源 / Power Supply
10. 其他 / Other Conditions
11. 隨機基本配件 / Basic Parts Delivered with S3

S3組成部分的描述：

1. 光學系統 OPTICAL SYSTEM

• 多塊高性能CCD檢測器系統

Multi High Resolution CCD Multi detectors (Charge Coupled Device) system with CCD solid state detectors.

• 每塊CCD 3,648 像素

Each CCD has 3,648 active elements (pixels equivalent)

• 高性能全息衍射光柵，光柵刻線3600 條/mm

High luminosity holographic grating with 3600 grooves per mm

• “智能校”算法+波長實時校準應對漂移

“Smart Calibration” arithmetic for drift

• 焦距：350 mm

Focal length 350 mm for all optical systems

• 譜線波長：130-800 nm

Spectral optical wavelength 130-800 nm

• 密閉的氬氣填充光學室可以避免灰塵、光線的干擾

Argon flush tight optical chamber sealed against light and dust

2. 元素譜線 ELEMENTS SPECTRAL LINES

• S3覆蓋了全元素分析范圍，可根據具體需要分析相應的元素

S3 can be equipped with all the needed spectral lines basing on analytical programs requested

• 光學系統包括固態檢測器能夠測量樣品所發出的所有譜線

Optical system includes full range multi-channel CCDs solid state detectors able to measure the whole optical spectra emitted by all elements in the samples

• 并且為將來可能的升級，增加分析線（元素）方便

It’s always possible to integrate new spectral lines (elements) for future upgrade

• 可現場增加分析程序

Possible on site addition of analytical program

3. 控制、采集和讀出系統CONTROL, ACQUISITION and READ OUT

• 電子系統具有微處理器控制的多通道積分和數據系統采集功能

Electronic system with integrators multi-channels and Data System Acquisition PC controlled by microprocessor

• 高速64位模數轉換器

High speed 64 Bit ADC

• ISP混合信號Flash微控制器100MHz

Mixed Signal ISP Flash MCU 100 MHz

• 串行通訊接口源

Serial Source Interface

• 高速讀出及高速USB 3.0借口支持快速數據控制與處理系統

High speed readout with high speed interface USB 3.0 for fast data processing and controlling the system

4. 火花源SPARK SOURCE

• 全自動控制火花源

Full automatic controlled source

• 半導體控制放電激發

Solid state spark source semiconductor controlled

• 1 到 100 A等離子體電流

Plasma current from 1 to 100 A

• 放電參數由密碼保護

The discharge parameters are protected by password

• 特別的分析要求可有不同的激發參數

Variable discharge parameters for individual analytical tasks

• 火花光源放電穩定，不受供電系統波動的影響

The spark source is stabilized against variations of the power supply

• 激發參數由激發線和分析程序自動標定和控制

Excitation parameters configured and controlled according to excitation lines and analytical programs automatically    

• 火花源可有多種參數設置

Spark source with variable parameters

• 火花頻率: 50 到 to 1000 Hz (可控)

Spark Frequency: 50 up to 1000 Hz (controllable)

• 單火花持續時間 10-10000 us (可控)

Single spark time 10-10000 us (controllable)

5. 火花臺SPARK STAND

• 開放式的火花臺可以分析測試重達20Kg的各種形狀的樣品

The open universal spark stand allows to analyze samples up to 20 Kg and suitable for samples in different forms

• 無污染電極無需更換

The anti-pollution electrode doesn’t need to be maintain

• 氬氣吹掃火花臺，低氬氣消耗

Argon flushed spark stand with minimum consumption of Argon

• 使用便捷的樣品夾支持快速樣品更換

Quick change with simple designed sample clamp for fast sample throughput

• 不同樣品的適配器可滿足各種樣品的需求（可選）

Small adapters for different samples are also available for various kind of samples (options)

6. 軟件：分析軟件、校正軟件、統計功能

SOFTWARE: ANALYTICAL, CALIBRATION AND STATISTIC FUNCTION

計算每種元素的校正曲線需考慮到各種基體（參考線）。

For calculation of calibration curves for each elements into consideration of various matrixes (references) available for the calculation of analytical results.

軟件功能: Software allows for

分析和校正：ANALYTICAL AND CALIBRATION:

• “智能校” : 用一塊標樣即可完成標準化

SMART CALIBRATION: standardization using a single sample

• 便捷的用戶圖形界面Easy GUI (Graphic Interface User) system
• 創建或修改分析程序Creation or modification analytical programs
• 常用的操作功能鍵Function keys for routine operations
• 可選擇的輸出方式 ( 強度，強度比，未校正的濃度，校正后的濃度等)

Output unit selectable (intensities, intensities ratios, uncorrected concentrations, corrected concentrations etc.)

• 可選擇的濃度單位 ( ppm, % ) Selectable concentrations units ( ppm, % )
• 通用標準化Global recalibration
• 微型標準化Mini calibration  ( Type recalibration)
• 校正元素間的干擾Correction of inter elemental interferences
• 可顯示標準偏差和相對標準偏差

Standard deviation and relative standard deviation functions

• 軟件可去除不良火花Repeat or reject one or more discharges
• 合金類型鑒定（UNI, ISO, DIN, EN, ASTM, JIS, BS, 等.）

Determination type of alloy (quality name) according to the requested norm (UNI, ISO, DIN, EN, ASTM, JIS, BS, etc.)

• 標樣庫Standards library
• 標準物質庫International norms library
• 牌號鑒定Quality identification
• 支持碳當量或其他參數的計算

Calculation of Carbon equivalence or any other parameter consequent to the analysis

• 可標記超出工作曲線范圍的元素分析結果

Signaling of out prefixed range elements

• 具有根據分析時間或激發次數自動再校正功能

Possibility of automatic signal for recalibration depending on time or on spark number

統計功能軟件：STATISTIC SOFTWARE functions:

• 統計計算Statistic calculation
• 可打印所有激發結果或是zui多100次的激發平均結果，及其標準偏差和相對標準偏差

Printing of all discharges or only the average of up more than 100 discharges, standard deviation and relative standard deviation

• 硬盤存儲數據便于今后的研究分析

Filing on Hard Disk of all data with possibility of researching various keys

• 可連接外部計算機或服務器

Connection to external computers or central/server system

綜合特性：General properties:

• 32位應用軟件Software with 32bit application
• 字體、字體大小設定 Fonts, font-sized setup up to setting on screen
• 日期/時間格式基于Windows設置Date/time formats compatible with Windows setup
• 多種輸出功能或?qū)υ挷僮鞯目旖輬D標 Various icons for quick access to output functions or dialogues
• 下拉式菜單操作文檔、篩選、觀察Drop lists for File, Filter, View
• 元素?cái)?shù)量不受限unlimited number of elements
• 樣品識別域數量不受限unlimited number of sample id fields
• 幫助文件Help task
• 測樣結果可以Excel或者PDF格式編輯 Measuring data could be edited by Excel or PDF
• 全自動控制，自動診斷功能Fully automatic control and automatic diagnostic function

數據庫：Database:

• 輸入、輸出 Import, Export
• 儀器與通信間的接口Communication & Instrument interfacing
• 文件的共享、傳輸File for sharing, transferring
• 輸出文件、統計程序Export to files, statistic programs

文檔：Documentation:

• 標準輸出、頁面設置logo或信頭功能Standard print, page set-up with logo or letter head functions
• 打印設置、打印預覽Printer set-up, Print Preview
• 數據打印、工作曲線打印Data printing, curves printing

分析管理：Analyses management:

• 數據庫管理和控制Database management and controller
• 多窗口支持多任務工作Multiwindows for multi tasks working
• 不限制察看分析結果列表的數目Unlimited number of views for analyses table
• 所有數據庫域的查詢功能Search function for all data fields in view
• 分析的編輯功能Edit function for analyses
• 分選結果時發出“滴滴”聲Click mark analyses selection
• 元素、大小、小數點的顯示格式Display formats with elements, forms, dimensions, decimals
• 分析結果復制功能Copy function
• 結果的單位和小數點選擇（不限數目）Units & dimensions (unlimited number)
• 手動分析結果輸入和樣品鑒別Manual analysis input and sample identification
• 可選使用條形碼閱讀器輸入樣品名稱Optional sample code imput using bar code reader
• 所有樣品識別和元素域的操作一目了然Transparent access thru all sample-ids & element fields
• 適用于所有分析結果的查詢和輸出Applicable for all analyses views and outputs
• 牌號數據庫Quality database
• 牌號控制功能Quality control function
• 牌號識別功能Quality identification
• 分析結果列表中牌號控制的顯示Display of quality control in the analyses table
• 收到的已存在牌號的自動檢測Automatically check of received qualities for existence
• 擴展公式編輯功能Formula editor with extended possibilities
• 自定義公式編輯Formula calculation
• 數字統計功能(序號, 加合, 平均, /相對 標準偏差, zui大, zui小, 范圍) Numeric statistics (no., sum, average, abs./rel std dev., min, max, range)
• 步宏編輯Macro programs, with asynchronous execution
• 異步宏排序Macro sequences, with asynchronous execution
• 自動項目或預定宏執行的任務服務器Job server for automatic event, or scheduled macro execution

7. 控制站：電腦CONTROL STATION : PERSONAL COMPUTER

GNR公司提供參考配置：

電腦 :臺式機（可選）需安裝并且確認軟件的兼容性。

CPU奔騰酷睿2、 內存 2GB

硬盤 >160 GB  7.200轉 、 DVD—CD-DVDRW-CDRW

顯示器LCD 17” 或 19” TFT

Windows 7操作系統

網絡、 顯卡, USB接口…

鍵盤、鼠標

打印機 :  惠普 Deskjet 打印機或同等產品

8. 尺寸 : DIMENSIONS

尺寸(Dimension):  W26 x D73 x H62 cm

重量(Weight)   :  約 80 Kg

9. 電源 : POWER SUPPLY :

110/220V +/- 10%，  單相（single phase）， 50/60 Hz  

16 A，  < 1.0 KVA

10. 其他 : OTHER CONDITIONS :

工作溫度范圍（Working temperature range）: +10°C - +35°C

濕度范圍（Working humidity）: 15 – 85%

氬氣溯流壓力（Argon upstream pressure） : ~200 bar

氬氣輸入壓力（Argon inlet pressure） : ~3.5 bar

氬氣質量（Argon quality） (min.) : 5.0 (99.999% 氬)

氬氣流量（Argon flow rates）

• 待機流量（Stand-by flow） : 0.3L/分鐘
• 分析流量（Analytical flow） :  6L/分鐘