產品細節圖：

代理丹尼遜葉片泵T6C-005-1R00-B1

代理丹尼遜葉片泵T6C-005-1R00-B1

http://m.duoo135.com/st366566/product_29112514.html產品性能：

1.可在壓力設定下具有自動高速流量及補償功能，比定量葉片泵功率損耗少，發熱低，是一種節省能源的高效率葉片泵，為系統設計工程師在高效率的回路中*選擇。

2.運轉平衡安靜，特別適合機床和室內的要求。

3.內含壓力調整機構，系統可以不要調壓閥并且適用直接式電動機，裝配容易。

4.備有多種不同壓力及流量范圍，可供任意選擇。

用材：進口鑄鐵

http://m.duoo135.com/st366566/product_29112514.html型號：T6C-005-1R00-B1

DENISON丹尼遜葉片泵T6C-005-1R00-A1、T6C-005-2R00-A1

DENISON丹尼遜葉片泵T6C-005-1R01-A1、T6C-005-2R01-A1

DENISON丹尼遜葉片泵T6C-005-1R02-A1、T6C-005-2R02-A1

DENISON丹尼遜葉片泵T6C-005-1R03-A1、T6C-005-2R03-A1

DENISON丹尼遜葉片泵T6C-005-1R00-B1、T6C-005-2R00-B1

DENISON丹尼遜葉片泵T6C-005-1R01-B1、T6C-005-2R01-B1

DENISON丹尼遜葉片泵T6C-005-1R02-B1、T6C-005-2R02-B1

DENISON丹尼遜葉片泵T6C-005-1R03-B1、T6C-005-2R03-B1

DENISON丹尼遜葉片泵T6C-005-1R00-C1、T6C-005-2R00-C1

DENISON丹尼遜葉片泵T6C-005-1R01-C1、T6C-005-2R01-C1

DENISON丹尼遜葉片泵T6C-005-1R02-C1、T6C-005-2R02-C1

DENISON丹尼遜葉片泵T6C-005-1R03-C1、T6C-005-2R03-C1

DENISON丹尼遜葉片泵T6C-006-1R00-A1、T6C-006-2R00-A1

DENISON丹尼遜葉片泵T6C-006-1R01-A1、T6C-006-2R01-A1

DENISON丹尼遜葉片泵T6C-006-1R02-A1、T6C-006-2R02-A1

DENISON丹尼遜葉片泵T6C-006-1R03-A1、T6C-006-2R03-A1

DENISON丹尼遜葉片泵T6C-006-1R00-B1、T6C-006-2R00-B1

DENISON丹尼遜葉片泵T6C-006-1R01-B1、T6C-006-2R01-B1

用途：葉片泵是一種常用的液壓油泵，具有噪聲低、工作效率高、造價相對較低等優點。散熱型變量葉片泵是一種典型變量葉片泵，比普通的葉片泵具有更多的優點，散熱性好好，高溫環境下使用更利于降低變量葉片泵中的熱量，保護變量葉片泵和電機不被高溫給燒壞。

包裝：紙箱包裝

使用說明：

1.為了使葉片泵可靠地吸油，其轉速必須在500～1500r/min的范圍，轉速太低時，葉片不能緊壓定子的內表面和吸油；轉速太高則造成泵的“吸空”現象，泵的工作不正常。油的粘度要選用適當，粘度太大，吸油阻力增大；油液過稀，間隙影響，真空度不夠，會對吸油造成不良影響。

2.葉片泵對油中的污物很敏感，工作可靠性較差，油液不清會使葉片卡死，因此必須注意油液良好過濾和環境清潔。

3.因泵的葉片有安裝傾角，故轉子只允許單向旋轉，不應反向使用，否則會使葉片折斷。

售后服務：產品整機質保一年

部分型號：T6C-005-1R00-B1

Product performance:

1., under pressure setting, it has automatic high speed flow and compensation function. Compared with the quantitative vane pump, it has less power loss and low fever. It is an energy saving high efficiency vane pump, which is the best choice for system engineer in efficient loop.

2. operation is balanced and quiet, especially suitable for machine tools and indoor requirements.

3. internal pressure adjustment mechanism, the system can not adjust the pressure valve and apply direct motor, easy assembly.

4. have a variety of different pressure and flow range, for any choice.

Imported iron: imported cast iron

Model：T6C-005-1R00-B1

Application: the vane pump is a common hydraulic oil pump with low noise, high efficiency and relatively low cost. The variable heat vane pump is a typical variable vane pump, which has more advantages than the ordinary vane pump, and has good heat dissipation. It is more conducive to reduce heat in vane pump and protect vane pump and motor at high temperature.

Packing: carton packing

Instructions：

1.in order to make the vane pump reliably suck oil, its speed must be in the range of 500 ~ 1500r/min. When the rotating speed is too low, the blade can't compactness the inner surface and oil absorption of the stator, and too high speed will cause the phenomenon of pump suction, and the pump's work is not normal. The viscosity of oil should be chosen appropriay, the viscosity is too large, the oil absorption resistance is increased, the fluid is too thin, the clearance is affected, and the vacuum degree is not enough, which will have a bad effect on the oil absorption.

2. vane pump is sensitive to contaminants in the oil, and the working reliability is poor. If the oil is not clear, the blades will choke. So we must pay attention to the good filtration and clean environment.

3. because the blade of the pump has the tilt angle, so the rotor is only allowed to rotate one way and should not be used in reverse. Otherwise, the blade will be broken.

After-sales service: product warranty for one year

Part model: