Miniature Multi-Holder MH-2微型多支架

Miniature Multi-Holder MH-2微型多支架

微型多支架MH-2

在樣品室周?chē)胖枚鄠€(gè)管子、電極和移液管。這個微型支架可以

連接到顯微鏡適配器或任何磁性表面。也可以使用

包括螺母柱（M3或4-40螺紋）。支架包括多個延伸臂，每個1英寸。很長，

兩個用于易碎附件的雙夾鉗和兩個球形接頭。使用拇指連接延長件

螺釘，可以方便地配置和調整傾斜、擺動和旋轉角度

軸線。下一頁是使用包含的部件以及所有配置所做的可能配置

可能有MTH和MH-1支架。項目#：MH-2

•腳?。?2毫米

•擴展：x4 1英寸。長x 2直角

•球頭：x2

•管夾：x2和x2雙夾

•安裝：磁性，M3，#4-40，M6和

#1/4-20螺紋表面，以及

通孔（可選MH-SCR適配器

可能是必需的）。

Miniature Multi-Holder MH-2
Holds multiple tubing, electrodes and pipettes around your sample chamber. This miniature holder can
be attached to microscope adapters or any magnetic surfaces. It can be also attached to any surface using
included standoffs (M3 or 4-40 thread). The holder includes a number of extension arms, each 1 in. long,
two double clamps for fragile accessories, and two ball joints. The extensions are attached using thumb
screws, which allow easy configurations and adjustments of tilt, swing, and rotation angles in multiple
axes. On the next page are possible configurations made using the included parts, plus all configuration
possible with MTH and MH-1 holders. Item#: MH-2
• Foot print: 12mm
• Extensions: x4 1in. long and x2 right-angle
• Ball-joints: x2
• Tubing clamps: x2, and x2 double-clamps
• Mounting: Magnetic, M3, #4-40, M6 and
#1/4-20 threaded surfaces, and surfaces with
through holes (optional MH-SCR adapter
might be required).

 注：楊清辰發布