Zero-Dead Volume Manifold零死體積流形

Zero-Dead Volume Manifold零死體積流形

零死體積流形零死體積有利于內部溶液交換

小容量灌注室。輸出通道可以在不同的高度進行調整，以防止

溶液污染。例如，可以定位低濃度溶液的輸出

更高，這樣就不會與其他溶液混合。上部通道也可用于提供抽吸

從小容量灌注室流出的過量溶液。

結合磁性保持架允許您定位流形周圍的任何地方您的樣品。兩個。

拇指螺釘將歧管固定在所需位置：高度、角度、長度。配有2英尺長的特氟龍

管道，連接至聚酰亞胺250/360微米內徑通道。所有管道都是可更換和可清洗的。

需要灌注系統或/和加壓小容量輸送系統SVDS1。可與

小容量PCCS2、CSC室和培養皿插入物。考慮使用微孔管接頭PS套件。

船上配置了六個360微米的通道，允許您制作1到6通道的折疊式顯示器。

是否需要8通道250微米內徑通道。項目35；：ZMM

其他通道：6通道，360微米

連接管：組成2ft.管

每個帶有l(wèi)uer連接器的通道

Zero-Dead Volume Manifold Zero-dead volume facilitates solution exchange inside
small volume perfusion chambers. The output channels can be adjusted at a different height to prevent
contamination of solutions. The outputs for lower concentration solutions, for example, can be positioned
higher so that they do not mix with other solutions. The upper channels can be also used to provide suction
of excess of solution from small volume perfusion chambers.
Incorporated magnetic holder allows you to position the manifold anywhere around your sample. Two
thumb screws fix the manifold in required position: height, angle, length. Comes with 2 ft. long Teflon
tubing, attached to polyimide 250/360 micron I.D. channels. All tubing is replaceable and washable.
Perfusion system or/and pressurized Small Volume Delivery System SVDS1 is required. Can be used with
small volume PCCS2, CSC chambers and petri dish inserts. Consider microbore tubing fitting PS-kit.
Ships configured with six 360micron channels, which allow you do make from 1 to 6-channel manifolds.
Specify if 8-channel 250 micron I.D. channels are required.. Item#: ZMM
• Output Channels: 6-channel, 360 micron
• Connecting tubing: incorporates 2ft. tubing
per channel with luer connectors

 注：楊清辰發布