DITO 靜電放電模擬器

具體成交價以合同協議為準

公司名稱 上海研鼎信息技術有限公司
品牌
型號
產地
廠商性質 經銷商
更新時間 2018/5/17 14:30:26
訪問次數 515

產品標簽

DITO 靜電放電模擬器

在線交流發送詢價查看電話同類產品

聯系我們時請說明是化工儀器網上看到的信息，謝謝!

索取相關資料

公司介紹 主營產品

一、研發、生產各種研發實驗室所需的儀器設備與耗材

二、代理經銷國外品牌的測試儀器與設備

三、承接實驗室建設與咨詢

日本DNP中國區*代理商

美國Applied Image亞洲區一級代理商

美國Imatest中國區一級代理商

德國Image Engineering愛莎中國區一級代理商

Japan DNP sole agent in China

The United States Applied Image Asia area level agents

The United States Iratest China level agents

Germany Image Engineering Elsa China level agents

展開

實驗室測試儀器與設備，光學測試套裝，光學暗室，攝像頭測試設備，聲學實驗室設備，靜音室，消音室，射頻測試儀器，手機研發測試儀器。

詳細信息 在線詢價

詳細介紹

Dito*是使用于不同應用場合的便攜式靜電放電模擬器。采用模塊化設計，可隨意更換放電頭并且根據標準更換放電網絡。該產品僅重940克，提供電池和交流電兩種供電方式。

功能描述

主要技術指標

接觸放電	500-10KV
空氣放電	500-16.5KV
誤差	±5%
R/C放電模塊	150PF/330Ω 符合IEC61000-4-2
	150PF/2000Ω 符合ISO TR10605（車外）
	330PF/2000Ω 符合ISO TR10605（車內）
	100PF/1500Ω 符合軍用標準

dito - the ultimate ESD tester

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated.
dito is the most advanced ESD tester to simulate ESD pulses as accuray as possible according to the standards requirements.

dito - The Most Versatile ESD Tester

dito is designed to support complete ESD test. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV. This is enough for more than a full days job. His different menues lead the user through standard tests, helps to evaluate the test points and allows to find susceptibility levels.
It is unlike any other ESD generator. Its ergonomic design is recognised to be more user-friendly. There is no part of dito that hides the discharge tip while watching the display or operating dito. You see where you point the tip no matter how you direct dito to the EUT.
The discharge voltage is measured and recorded. Discharge is stopped automatically when battery voltage becomes low. User is informed when dito cannot charge properly. All this helps to assure reliable and reproducible tests without any question mark and doubt.
Discharge tips and discharge networks can easily be changed without dismantling dito; simply remove one and plug-on another tip or module. The discharge modules are automatically recognised and the R/C configuration is shown in the display. You just can’t use a wrong discharge network!

Easy to Operate

dito can be operated with one hand only （left or right hand doesn’t matter）. All operation keys are well reachable with your thumb. The trigger button is operated with your point finger.
The large display shows all relevant parameters. The easy-to-follow menu structure allows fast settings and change of parameters.

Test voltage AD mode	500V - 16,500V

Test voltage CD mode	500V - 10,000V

Resolution	100V

Polarity	Positive, negative

Rise time with 150pF/330ohm （CD mode）	0.7ns - 1.0ns

Holding time （AD mode）	> 5s

The special designed power concept of dito allows to generate more than 150,000 contact discharge pulses at 10kV with one fully loaded battery. Acustic signals help to guide the user through the test process. Features like discharge voltage measurement, discharge voltage threshold level to avoid too low discharges to be applied and various Test Routines make the dito an unsurpassed ESD tester.