118-41 SOLVENT-RESISTANT 耐溶劑導電油墨

說明：118-41是一種耐溶劑、絲網印刷、導電油墨和涂料。這個產品與卡普頓、聚脂薄膜、玻璃、聚碳酸酯和其他多種基材具有良好的附著力。不像傳統的導電材料，這種產品對丙酮和甲乙酮（mek）有很強的抵抗力。它是也非常耐刮擦和折痕。118-41的一些應用包括但不限于EMI/RFI聚酰亞胺撓性電路、聚合物厚膜電路、薄膜開關、電氣附件的屏蔽鉭電容器用表面安裝器件和陽極涂層。120-24是50Ω/sq/mil碳版本產品。

典型固化特性：

粘度（cps）18000

填充銀

銀百分比（固化）>89

抗皺性佳

體積電阻（歐姆厘米）0.000025

片材電阻率（ohm/sq./mil）0.010

可焊性編號

水解穩定性優異

有效溫度范圍（攝氏度）-55至200

熱穩定性（攝氏度）達到325

建議的處理和固化：118-41已準備好供應使用?？梢赃M(jìn)一步細化加入少量cmi稀釋劑203和/或稀釋劑113-12。使用前一定要重新掛起銀色的。對于大多數應用而言，在165℃下固化45分鐘或在175℃下固化30分鐘可獲得性能。

建議終用戶通過實驗確定適合個人應用的溫度和時間。

貯存期：25℃下保存3個月；5℃下保存6個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

118-41 SOLVENT-RESISTANT 耐溶劑導電油墨

 118-41
SOLVENT-RESISTANT ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-41 is a solvent-resistant, screen-printable, electrically conductive ink and coating. This product
features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike
conventional conductive materials, this product is very resistant to acetone and methyl ethyl ketone (MEK). It is
also very resistant to scratching and creasing. Some applications for 118-41 include, but are not limited to, emi/rfi
shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for
surface mounted devices, and anode coatings for tantalum capacitors. 120-24 is a 50 Ω/sq/mil carbon version of this
product.
TYPICAL CURED PROPERTIES:
Viscosity (cps) 18,000
Filler Silver
Percent Silver (cured) > 89
Crease Resistance Excellent
Volume Resistance (ohm-cm) 0.000025
Sheet Resistivity (ohm/sq./mil) 0.010
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 200
Thermal Stability (°C) Good to 325
SUGGESTED HANDLING & CURING: 118-41 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI Thinner #203 and/or Thinner # 113-12. Prior to using, be certain to re-suspend
silver. Best properties, for most applications, result when cured for 45 minutes at 165ºC or 30 minutes at 175ºC.
End user is advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf life: 3 months at 25°C; or 6 months at 5°C; or 12 months at –10 ºC.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.