您好, 歡迎來到化工儀器網
UV紫外光加速老化試驗機測試設備的標準中文以及英文版
Q8/UV紫外光加速老化試驗機
型號 MODEL | Q8/UV3 | Q8/UV2 | Q8/UV1 |
| UV 照射 EXPOSURE | ● | ● | ● |
| 冷凝 CONDENSATION | ● | ● | ● |
| 光照控制 IRRADIANCS CONTROL | ● | ● | |
| 可調光線 ADJUSTABLE IRRADIANCE | ● | ● | |
| 噴水 WATER SPRAY | ● | ||
| 熱沖擊 THERMAL SHOCK | ● | ||
| 自動偵路 SELF-DIAGNOSTICS | ● | ● | ● |
| 燈泡數量 LAMP Q'TY | 紫外線燈管 8 支，備品 4 支 ULTRAVLOIET LAMP 6PCS, SPARES 4 PCS （美國Q-LAB,Q-PANEL,美國ATLAS,UVA340,UVB313,UVC351） | ||
| 記錄器 RECORDER | 選配 （OPTIONAL） | ||
| 輻射計 Q8-CR CALIBRATION RADIOMETER | 選配 （OPTIONAL） 機器輻射強度： 1.0W／M2／340NM以內可調 1.1W／M2／313NM以內可調 | ||
| UV 溫度 TEMP | 50 ℃ -75 ℃ | ||
| 冷凝溫度 CONDENSATION TEMP | 40 ℃ -60 ℃ | ||
| 測試容量 TEST CAPACITY | 48PCS 片/SE SPRAY（ 75 X 150M M ） 50PCS片/BASIC （ 75 X 150M M ） | ||
| 水涼及耗量 WATER | 蒸餾水每分鐘 蒸餾水每日 8 公升 | ||
| 體積 DIMENSION（W X D X H） | 137 X 53 X 136CM | ||
| 重量 WEIGHT | 136KG | ||
| 電源 POWER | 1 Ψ ， 120V/60HZ,16A OR 230V/50HZ, 9A,1800W（MA | ||
UV紫外光加速老化試驗機測試標準
AAMA 624
Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles
This specification describes test procedures and performance requirements for high performance, organic, coatings applied to fiber reinforced thermoset profiles for windows, doors and similar products.
AAMA 624
纖維增強熱固性型材上的高性能有機涂層的推薦規格、性能要求和測試程序
本規范描述了高性能有機涂料的測試程序和性能要求，這類涂料應用于纖維增強熱固性型材（窗、門和類似的產品）。
AATCC TM186
Weather Resistance: UV Light and Moisture Exposure
This test method provides a procedure for the exposure of textile materials of all kinds, including coated fabrics and products made thereof, in a laboratory artificial weathering exposure apparatus employing fluorescent UV lamps as a light source and using condensing humidity and/ or water spray for wetting.
AATCC TM186
耐候性 紫外線和潮濕曝露測試
本測試方法提供了各類紡織品材料（包括涂層織物和由其制造的產品）曝露測試的程序。測試采用實驗室人工老化曝露裝置，用熒光紫外燈管作為光源，使用冷凝加濕和/或噴淋加濕。
ASTM C1257
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
This test method includes two laboratory accelerated exposure procedures for predicting the effects of ultraviolet or ultraviolet/visible radiation, heat, and moisture on color, chalking, cracking, and adhesion of solvent-release sealants.
ASTM C1257
溶劑釋放型密封劑加速老化的標準測試方法
該測試方法包括兩個實驗室加速暴露測試程序，用于預測紫外線或紫外線/可見光輻射、熱量和濕氣對溶劑釋放型密封劑的顏色、粉化、開裂和附著力的影響。
ASTM C1442
Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
This practice covers three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.
ASTM C1442
使用人工老化設備對密封劑進行測試的方法
本測試方法包括三種實驗室加速老化曝露程序，評估太陽光輻射、熱和潮濕對密封劑的影響。
ASTM C1501
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
This test method describes laboratory accelerated weathering procedures using either fluorescent ultraviolet or xenon arc test devices for determining the color stability of building construction sealants.
ASTM C1501
實驗室加速老化程序評估建筑結構密封劑色牢度的標準測試方法
本測試方法描述了使用熒光紫外線或氙燈測試設備測定建筑結構密封劑色牢度的實驗室加速老化程序。
ASTM C1519
Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
This test method covers the method for the determination of the durability of a sealant based on its ability to function in cyclic movement maintaining adhesion and cohesion after repeated exposure to laboratory accelerated weathering procedures.
ASTM C1519
實驗室加速老化對建筑結構密封劑耐候性評估的標準測試方法
該測試方法是密封劑耐候性的測定方法，是基于在依據實驗室加速老化程序反復曝露后，密封劑在循環運動中保持粘連和凝聚的能力來制定的。
ASTM C732
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
This test method covers a laboratory procedure for the determination of aging effects of artificial weathering on latex sealants.
ASTM C732
乳膠密封劑人工老化試驗效果的標準測試方法
該測試方法規定了測定人工老化乳膠密封劑老化效果的實驗室程序。
ASTM C734
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
This test method covers a laboratory procedure for the determination of low-temperature flexibility of latex sealants after 500 h artificial weathering.
ASTM C734
人工老化后乳膠密封劑的低溫彈性的標準測試方法
該測試方法規定了人工老化測試500小時后乳膠密封劑低溫彈性的實驗室程序。
ASTM C793
Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
This test method covers a laboratory procedure for determining the effects of accelerated weathering on cured-in-place elastomeric joint sealants (single- and multi-component) for use in building construction.
ASTM C793
彈性接縫密封膠實驗室加速老化效果的標準測試方法
該測試方法包括了密封劑耐候性的測定，通過將密封劑經依據實驗室加速老化程序反復暴露后，評價其在周期運動中保持粘合力和附著力。
ASTM D1148
Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
This test method covers techniques to evaluate the surface discoloration of white or light-colored vulcanized rubber that may occur when subjected to UV or UV/visible exposure from specified sources under controlled conditions of relative humidity, or moisture, and temperature.
ASTM D1148
橡膠老化的標準測試方法－由紫外線（UV）和熱曝露引起的淺色表面的變色
本測試方法規定了白色或淺色硫化橡膠表面變色的評估技術，受到來源的紫外線或紫外線/可見光照射，在受控的相對濕度或濕氣及溫度條件下，就有可能發生變色。
ASTM D1670
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
This test method covers the use of a spark generating apparatus for determination of failure due to cracking of bituminous materials undergoing accelerated or outdoor weathering on electrically conductive backings.
ASTM D1670
瀝青材料加速和戶外老化失效終點的標準測試方法
該測試方法規定了使用火花發生裝置測定在導電底材上經加速或戶外老化瀝青材料的開裂失效。
ASTM D3424
Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
This standard describes procedures for the determination of the relative lightfastness and weatherability of printed matter under the following conditions, which involve exposure to natural daylight or accelerated procedures in the laboratory.
ASTM D3424
印刷品相對日曬色牢度和耐候性評估的標準測試方法
這個標準描述了印刷品在下列情況下相對日曬色牢度和耐候性的評估程序，涉及自然光曝露測試程序或?qū)嶒?yàn)室加速曝露測試程序。
ASTM D3451
Standard Guide for Testing Coating Powders and Powder Coatings
This guide covers the selection and use of procedures for testing coating powders and powder coatings. The test methods included are listed in Table 1. Where more than one test method is listed for the same characteristic, no attempt is made to indicate superiority of one method over another. Selection of the methods to be followed must be governed by experience and the requirements in each individual case, together with agreement between the purchaser and the seller.
ASTM D3451
涂料粉末和粉末涂料測試的標準指南
本指南規定了涂料粉末和粉末涂料測試的選擇和使用程序。 測試方法已列于其中Table 1。對于某一特征，如果列出一個以上的測試方法，說明方法之間沒有哪個更適合。 必須根據經驗和每個案例的要求，以及買方和賣方之間的協議選擇要遵循的方法。