您好, 歡迎來到化工儀器網(wǎng)
產(chǎn)品簡介
詳細介紹
The B+K Precision model 520C Transistor Tester is designed for in circuit and out of circuit transistor testing with special features for making additional tests on devices out of circuit. The instrument is designed for a minimum amount of control manipulation, making for rapid testing of most devices.
-Determines good or bad transistors, FET's, SCR's, or diodes.
-Patented limited energy pulse circuit permits in circuit testing in the presence of low shunt impedance's with complete safety for the device under test.
-Easy to operate panel eliminates the need to refer to a reference or operating manual only three switches, no panel adjustments.
-Six position test switch makes it unnecessary to know the device terminal identification.
-A logarithmically scaled meter identifies leakage in both Silicon and Germanium devices.
-Front Panel socket for out of circuit transistor testing
技術(shù)參數(shù)：
| | 520C | 510A |
| IN-CIRCUIT TEST | ||
| GOOD/BAD TEST | PNP and NPN transistors FET’s, SCR’s | |
| IDENTIFIES | NPN or PNP FET as N-channel or P-channel Silicone or germanium transistors transistors in LO drive, base lead in HI drive all leads of SCR | NPN or PNP FET as N-channel or P-channel FET-gate lead, all leads of |
| OUT-OF-CIRCUIT TEST | ||
| GOOD/BAD TEST | PNP and NPN transistors FET’s, SCR’s | PNP and NPN transistors FET’s |
| IDENTIFIES | NPN or PNP FET as N-channel or P-channel Silicone or germanium transistors | NPN or PNP FET as N-channel or P-channel |
| MEASURES | Reverse leakage from 0.1mA to 9mA | Does not apply |
| AUTOMATIC INDICATORS | ||
| AUDIBLE TONE | GOOD | Does not apply |
| LED | NPN or PNP, Ge or Si | NPN or PNP, Ge or Si |
| TEST SWITCH | Base or Gate for good transist or FET’s | Base or Gate for good transistor or FET’s |
| METER SCALES | Readable from 0.1μA to 9mA for Ice leakage, calibrated for silicon and germanium power and signal transistor leakage limits | Does not apply |
| APPLIED TEST CURRENTS | ||
| BASE DRIVE* | 250mA （HI）, 1mA （LO） | |
| COLLECTOR* | 125mA | |
| TEST REPETITION | 10Hz | 5Hz |
| IN-CIRCUIT SHUNT LIMIT FOR VALID GOOD/BAD TEST | ||
| RESISTANCE | >10Ω （HI）, 1.5kΩ （LO） | |
| CAPACITANCE | <15mF （HI）, 0.3mF （LO） | <25mF （HI）, 0.3μF （LO） |
| GENERAL | ||
| POWER REQUIREMENT | 9V Battery （Supplied） or optional AC adaptor | 6VDC from 4 “AA” batteries（not supplied） |
| OPERATING TEMP | 32° to 104°F （0° to 40°C）, <75% RH | |
| DIMENSIONS（HxD） | 7.5 x 4.0 x 2.0"（191 x 102 x 51 mm） | |
| WEIGHT | 1 lb. （450g） | |