會員.png)
9
Force Biphenyl 分析柱(USP L11)
Force Biphenyl 分析柱描述：
處理生物分析測試應用如藥物和代謝物分析。
在C18和其他苯基化學物質上難以分辨或洗脫的化合物的選擇性和保留性得到提高。
限制電離抑制，并允許簡單，MS友好的流動相。
Restekzui流行的LC固定相
Force Biphenyl 分析柱類似固定相：Unique
The culmination of 20+ years in LC, Force performance LC columns are long-lasting and reproducible, even under the stress of UHPLC. Premium quality is backed by the strength of our 100% Pure Satisfaction guarantee. And perhaps most important, Force columns are fully scalable between 3 or 5 μm HPLC and 1.8 μm UHPLC, so you can easily transfer and optimize methods without extensive calculations.
The innovative Biphenyl is Restek's most popular LC stationary phase because it is particularly adept at separating compounds that are hard to resolve or that elute early on C18 and other phenyl chemistries. As a result, Biphenyl columns are extremely useful for bioanalytical testing applications like drug and metabolite analyses, especially those that require a mass spectrometer (MS). Increasing retention of early-eluting compounds can limit ionization suppression, and the heightened selectivity helps eliminate the need for complex phases that are not well-suited for MS detection.
Stationary Phase Category: Phenyl (L11)
Ligand Type: Biphenyl
Particle: 1.8 μm, 3 μm, or 5 μm fully porous silica
Pore Size: 100 Å
Carbon Load: 15%
End-Cap: yes
Surface Area: 300 m2/g
Recommended Usage:
pH Range: 2.0–8.0
Maximum Temperature: 80 °C
Maximum Pressure: 1,034 bar/15,000 psi* (1.8 μm), 600 bar/8,700 psi (3 μm); 400 bar/5,800 psi (5 μm)
* For maximum lifetime, recommended maximum pressure for 1.8 μm particles is 830 bar/12,000 psi.
Properties:
- Increased retention for dipolar, unsaturated, or conjugated solutes.
- Enhanced selectivity when used with methanolic phase.
- Ideal for increasing sensitivity and selectivity in LC-MS analyses.
Switch to a Biphenyl when: - Limited selectivity is observed on a C18.
- You need to increase retention of hydrophilic aromatics.
訂貨信息：
Force Biphenyl 分析柱
| 貨號 | 粒徑 | 長度 | 內徑 |
| 9629232 | 1.8 μm | 30 mm | 2.1 mm |
| 9629252 | 1.8 μm | 50 mm | 2.1 mm |
| 9629212 | 1.8 μm | 100 mm | 2.1 mm |
| 962925E | 1.8 μm | 50 mm | 3.0 mm |
| 962921E | 1.8 μm | 100 mm | 3.0 mm |
| 9629332 | 3 μm | 30 mm | 2.1 mm |
| 9629352 | 3 μm | 50 mm | 2.1 mm |
| 9629312 | 3 μm | 100 mm | 2.1 mm |
| 9629362 | 3 μm | 150 mm | 2.1 mm |
| 962935E | 3 μm | 50 mm | 3.0 mm |
| 962931E | 3 μm | 100 mm | 3 0 mm |
| 962936E | 3 μm | 150 mm | 3.0 mm |
| 9629315 | 3 μm | 100 mm | 4.6 mm |
| 9629365 | 3 μm | 150 mm | 4.6 mm |
| 9629552 | 5 μm | 50 mm | 2.1 mm |
| 9629512 | 5 μm | 100 mm | 2.1 mm |
| 9629562 | 5 μm | 150 mm | 2.1 mm |
| 962955E | 5 μm | 50 mm | 3.0 mm |
| 962951E | 5 μm | 100 mm | 3.0 mm |
| 962956E | 5 μm | 150 mm | 3.0 mm |
| 9629515 | 5 μm | 100 mm | 4.6 mm |
| 9629565 | 5 μm | 150 mm | 4.6 mm |
| 9629575 | 5 μm | 250 mm | 4.6 mm |
