100 ml Standard Whirl-Pak® Thio-Bags®

Product Number: B01040WA

With sodium thiosulfate.
100 ml capacity
3" W x 7-1/4" L （7.5 x 18.5 cm）
2.25 mil （.057 mm） thick
Box of 100
Specially designed for sampling chlorinated water, the Whirl-Pak® Thio-Bag® is economical and convenient to use. This single use, sterilized, lightweight, unbreakable container is always ready for immediate use. It will save…
• Technician Time
• Replacing Sample Containers
• Utility Costs
• Storage Space
• Disposal Costs
Used by many states and EPA approved, this strong transparent bag holds a nontoxic, nonnutritive tablet containing 10 mg of active sodium thiosulfate to neutralize chlorine at the time of collection. As an added feature, Thio-Bags® have:
• A Convenient Write-On Strip
• Markings for 100 ml and 300 ml Measurements
These markings help the technician collect the correct amount of water as required by the testing procedure （fill lines are approximate）. The write-on strip will accept virtually any writing instrument and minimizes ink smearing on the surface. A box of 100 bags takes up considerably less space than a box of 100 sample bottles. The 4-oz. （100 ml） size bags are packaged 25 in a sealed bag, four bags per box, for easy use.
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F （82° C）. Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after freezing. All bags are sterilized after manufacturing.

Mailing Tube for Thio-Bags®，Product Number: B01101WA

For mailing 100 ml Thio-Bags®, regular or stand-up, use this sturdy multiple-use polyethylene container. To close the tube, place the caps tightly on each end, place two pieces of tape over each cap, and apply address label. Tube measures 5" L x 2" dia. （13 x 5 cm）.

300 ml Standard Whirl-Pak® Thio-Bags，Product Numb: B01254WA

With sodium thiosulfate.
300 ml capacity
4-1/2" W x 9" L （11.5 x 23 cm）
2.5 mil （.064 mm） thick
Box of 100
When it is necessary to run multiple tests, this 18-oz. Thio-Bag® provides a 300 ml sample. It contains three times the amount of sodium thiosulfate as the smaller Thio-Bag® and holds 300 ml when filled to the top of the white write-on strip （fill line）.
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F （82° C）. Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after freezing. All bags are sterilized after manufacturing.

100 ml Stand-Up Whirl-Pak® Thio-Bags

Product Number: B01402WA

With sodium thiosulfate.
100 ml capacity
3" W x 7-1/4" L （7.5 x 18.5 cm）
2.5 mil （.064 mm） thick
Box of 100
The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up compley by itself. No rack or other holder is needed to keep the bag upright. Forget washing and sterilizing glass bottles and disposing of expensive vials. Sterile and unbreakable, these bags will save time and money whether working in the lab or in the field. Each bag contains 10 mg of active sodium thiosulfate to neutralize chlorine in the sample.
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F （82° C）. Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after freezing. All bags are sterilized after manufacturing.

300 ml Stand-Up Whirl-Pak® Thio-Bags

Product Number: B01403WA

With sodium thiosulfate.
300 ml capacity
4-1/2" W x 9" L （11.5 x 23 cm）
3.0 mil （.076 mm） thick
Box of 100
The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up compley by itself. No rack or other holder is needed to keep the bag upright. Forget washing and sterilizing glass bottles and disposing of expensive vials. Sterile and unbreakable, these bags will save time and money whether working in the lab or in the field. Each bag contains 30 mg of active sodium thiosulfate to neutralize chlorine in the sample.
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F （82° C）. Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after freezing. All bags are sterilized after manufacturing.

100 ml Waste Water Thio-Bags® ，Product Number: B01440WA

3" W x 7-1/4" L （7.5 x 18.5 cm）
2.25 mil （.057 mm） thick
Box of 100
Meets National Environmental Laboratory Accreditation Conference （NELAC） standard, June 2003, for sampling waste water treated with 15 mg/l of chlorine. Sterile, 100 ml bag contains 30 mg of sodium thiosulfate to neutralize chlorine. The bag has 100 ml and 4-oz. fill lines.
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F （82° C）. Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after freezing. All bags are sterilized after manufacturing.