90Plus測量應用案例-2016-48
文獻名: Factors controlling the turbidity of submicron emulsions stabilized by food biopolymers and natural surfactant
作者: Jian Zhang, Gary A. Reineccius
Department of Food Science and Nutrition, University of Minnesota, 1334 Eckles Avenue, St Paul, MN 55108, USA
摘要:There is a market need of emulsion-based beverages to delivery insoluble materials and yet provide desirable appearance (cloudy or transparent). Submicron emulsions (70–450 nm) stabilized by modified starch (MS), whey protein isolate (WPI), and Quillaja saponins (QS) were prepared using microfluidization. Emulsions were characterized by dynamic light scattering, cryogenic scanning electron microscopy, and turbidimeter. Factors influencing the formation and turbidity of prepared emulsions were evaluated. Results showed that mean droplet diameter (MDD) of prepared emulsions decreased with increasing emulsifier concentration, homogenization pressure (41, 96 and 152 MPa), and number of passes (1–6) through a Microfluidizer®. When MDD >100 nm, lipid phase with higher refractive index imparted higher turbidity. WPI and QS interface imparted higher turbidity than MS interface. As MDD decreased to about 100 nm, turbidity was independent of lipid phase and interface composition. Turbidity and MDD showed polynomial correlation with maximum turbidity achieved at MDD of around 500 nm. Turbidity increased linearly with dispersed phase concentration (0.1–1 mg/g) and decreased with increasing refractive index of continuous phase (1.333–1.442). This study provides valuable information for the formulation of emulsion-based beverages with specified turbidity.
關鍵詞:Droplet size; Turbidity; Refractive index; Droplet interface
相關產品
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請?jiān)谧髌钒l(fā)表之日起一周內與本網聯系,否則視為放棄相關權利。