国产精品视频一区二区三区四,亚洲av美洲av综合av,99国内精品久久久久久久,欧美电影一区二区三区电影

產品推薦:氣相|液相|光譜|質譜|電化學|元素分析|水分測定儀|樣品前處理|試驗機|培養箱


化工儀器網>技術中心>行業標準>正文

歡迎聯系我

有什么可以幫您? 在線咨詢

ASTM G24-13測試標準

來源:廣東宏展科技有限公司   2018年07月24日 17:23  

本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用,為確保測試結果的準確性、節省您的時間,如需ASTM G24-13標準詳細信息或ASTM G24-13具體測試方法,歡迎與我們技術人員聯系或給我們留言,我們將為您相關的技術支持。

 

ASTM G24-13標準介紹

ASTM G24是在透過玻璃的日光下進行曝露試驗的標準測試方法: 本標準用于評價非金屬材料耐玻璃過濾的太陽輻射的能力。標準限于開展暴露的方法。試驗樣品的制備和結果的評定在特定材料的各種標準中規定?,F行標準修訂于2013年。

 

1. Scope

1.1 This practice evaluates the resistance of nonmetallic materials to solar radiation filtered through glass in passively ventilated and non-vented enclosures. For exposures in under glass enclosures with forced air circulation, refer to Practice G201.

1.2 For direct exposures, refer to Practice G7.

1.3 This practice is limited to the method of conducting the exposures. The preparation of test specimens and evaluation of results are covered in various standards for the specific materials.

1.4 Exposure conducted according to this practice can use two types of exposure cabinets.

1.4.1 Type A—A cabinet that allows passive ventilation of specimens being exposed behind glass.

1.4.2 Type B—Enclosed cabinet with exterior painted black that does not provide for ventilation of specimens exposed behind glass. Exposures conducted using a Type B cabinet are typically referred to as “black box under glass exposures.”

1.5 Type A exposures of this practice are technically similar to Method B of ISO 877-2.

1.6 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

2. Referenced Documents

ASTM Standards

C1036 Specification for Flat Glass

D3424 Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

D4303 Test Methods for Lightfastness of Colorants Used in Artists Materials

D6901 Specification for Artists Colored Pencils

E824 Test Method for Transfer of Calibration From Reference to Field Radiometers

E903 Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

E1084 Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight

G7 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G173 Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 Tilted Surface

G177 Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface

G201 Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation

 

▼ASTM G24-13第三方檢測機構

以上標準信息來自互聯網搜索整理,如需了解完整的ASTM G24-13的信息或ASTM G24-13標準解讀,歡迎詳詢。

免責聲明

  • 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
  • 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
  • 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。
企業未開通此功能
詳詢客服 : 0571-87858618
大同市| 贺兰县| 长海县| 海丰县| 色达县| 栖霞市| 福州市| 咸阳市| 莲花县| 滁州市| 仁布县| 金华市| 贞丰县| 阳高县| 扎赉特旗| 丘北县| 永昌县| 多伦县| 甘南县| 固镇县| 台州市| 盐城市| 青冈县| 滨海县| 绥中县| 庄河市| 东乡| 布尔津县| 五寨县| 巴楚县| 云南省| 建宁县| 板桥市| 东阿县| 海晏县| 济南市| 乌什县| 湖北省| 绥德县| 进贤县| 元江|