英國Ultracell蓄電池UL7-12 12V7AH后備電源

英國Ultracell蓄電池UL7-12 12V7AH后備電源

Ultracell（UK）Limited

Ultracell成立于1999年，位于英國利物浦，是閥控鉛酸（VRLA）電池的全??球。除了在英國的VRLA市場中占有相當大的份額外，Ultracell還向歐洲，南美，中美洲，中東，非洲和美國大陸的70多個國家出口其產品。

由于我們致力于提供高質量，高性價比的電池，因此我們的客戶服務是的。我們以自身的靈活性和迅速采取行動以將新的行業產品推向市場的能力而感到自豪。

我們的產品銷往70多個國家/地區，廣泛應用于需要經濟高效的直流電源的電子和工業應用。我們不斷開發新產品，以適應行業快速變化的需求。

Ultracell通過其內部經驗豐富的顧問團隊以及廣泛的分銷網絡提供持續的專業支持。由我們的多語言銷售和營銷部門以客戶自己的語言為客戶提供技術，市場和*資料。

These series features silver-coated terminals, which improve the electric conductivity. To optimize high rate performance a unique paste formula have been applied to the plate technology.

This series also features AGM separators, which use less electrical resistance to improve the current.

This series is specifically designed for 19 or 23 inch power cabinets. The front terminals make the installation and maintenance easy. The unique valve design reduces water loss and prevents air going inside the battery.

This series is specifically designed for 19 or 23 inch power cabinets. The front terminals make the installation and maintenance easy. The unique valve design reduces water loss and prevents air going inside the battery.

Capacity

Amount of charge available from a battery or cell. Measured in ampere-hours. There are various sub definitions of capacity as listed below depending on the conditioned under which it is measured.

Actual Capacity

Cell capacity of a fully formed and fully charged cell when measured under non-standard conditions including non-standard end of discharge voltage.

Available Capacity

Capacity of a fully formed and fully charged cell delivered under non-standard conditions including non-standard end of discharge voltage.

Dischargeable Capacity

Capacity which a partially discharged cell can deliver before it becomes fully discharged or the amount of capacity that can be withdrawn after a limited charge input.

容量

從電池或電池中獲得的電量。以安培小時為單位。下面列出了各種能力的子定義，這取決于其測量所依據的條件。

有效容量，實際生產（能）力

在包括非標準放電電壓在內的非標準條件下測量*成形和全充電電池的電池容量。

有效功率，可用功率，有效容量

在包括非標準放電電壓的非標準條件下交付的*成形和全充電電池的容量。

可分辨率卡帕提

部分放電電池在*放電之前可以提供的容量，或者在有限的電荷輸入后可以撤回的容量。

Nominal Capacity

Capacity typically delivered under standard conditions; a value greater than rated capacity which is a minimum value.

Permanent loss of Capacity

Reduction in cell capacity from the "fully formed, as new" value, measured under standard rating conditions, that is not recoverable by reconditioning.

Rated Capacity

Capacity value shown in the specification sheet. The minimum expected capacity when a new, but fully formed, cell is measured under standard conditions. The basis of the C rate. Note that rated capacities depend on the standard conditions used which may vary from battery to battery.

Residual Capacity

Capacity remaining after discharge.

Retained Capacity

Capacity remaining in a cell after an open circuit rest period. The result of self- discharge.

Standard Capacity

Cell capacity measured under standard conditions.

Temporary Loss of Capacity

Reduction in cell capacity that is recovered when the cell is reconditioned.

通常在標準條件下交付的額定容量；大于額定容量的值，這是一個小值。喪失電池容量的能力 “*形成，作為新的”值，在標準的額定條件下測量，這是不能通過修復恢復的。規格表中顯示的額定容量容量值。低驅逐 當一個新的，但*形成的電池是在標準條件下測量的。C匯率的基礎。請注意，額定容量取決于所使用的標準條件，這些條件可能與ba不同。 用陶器換電池。放電后剩余容量。在開路休息期間后保持電池內的容量。自我放電的結果。標準C 在標準條件下測量不透明細胞容量。在小區被修復時恢復的小區容量的暫時喪失。

Cell

Electrochemical unit, composed of positive and negative electrodes, separator, and electrolyte, which is capable of storing electrical energy. When encased in a container and provided with electrical terminals, the cell is the basic "building block" of a battery. Although the capacity of the cell is determined by its size, the cell's voltage is strictly a function of the basic electrochemistry of the couple.

Cell Reversal

Reversing of polarity of terminals of a cell in a multi-cell battery due to over discharging.

Charge

Return of electrical energy to a battery.

Charge Acceptance

Willingness of a battery or cell to accept change. May be affected by cell temperature, charge rate and state of charge.

Charge Efficiency

Value obtained when the increase in dischargeable capacity of the battery is divided by the current input. A measure of charge acceptance. Also indicates

電池電化學單元，由正負極、分離器和電解液組成，能夠儲存電能。當封裝在容器中，并提供SELECT 醫療終端，電池是電池的基本“基石”。雖然電池的容量取決于它的大小，但電池的電壓嚴格地取決于基本的電化學家 這對夫婦。由于過放電而逆轉多電池中電池端子極性的方法。將電能充電回電池。收費驗收W 電池或電池的虛幻以接受改變。可能受電池溫度、電荷率和電荷狀態的影響。當可卸荷容量增加時所獲得的充電效率值 電池除以電流輸入。收費的接受程度。還表示

發電機依靠電壓調節器控制輸出電壓。電壓調節器檢測三相輸出電壓，以其平均值與要求的電壓值相比較。調節器從發電機內部的輔助電源取得能量，通常是與主發電機同軸的小發電機，傳送DC電源給發電機轉子的磁場激勵線圈。線圈電流上升或下降，控制發電機定子線圈的旋轉磁場或稱為電動勢EMF的大小。定子線圈的磁通量決定發電機的輸出電壓。

發電機定子線圈的內阻以Z表示，包括感性和阻性部分;由轉子勵磁線圈控制的發電機電動勢用交流電壓源以E表示。假設負載是純感性的，在向量圖中電流I滯后電壓U正好90°電相位角。如果負載是純阻性的，U和I的矢量將重合或同相。實際上多數負載介于純阻性和純感性之間。電流通過定子線圈引起的電壓降用電壓矢量I×Z表示。它實際上是兩個較小的電壓矢量之和，與I同相的電阻壓降和超前90°的電感壓降。在本例中，它恰好與U同相。因為電動勢必須等于發電機內阻的電壓降和輸出電壓之和，即矢量E=U和I×Z的矢量和。電壓調節器改變E可以有效地控制電壓U。

現在考慮用純?nèi)菪载撦d代替純感性負載時，發電機的內部情況會發生什么變化。這時的電流和感性負載時正好相反。電流I現在超前電壓矢量U，內阻電壓降矢量I×Z，也正好反相。則U和I×Z的矢量和小于U。