作者: S. Drew Storya,Stephen Boggsa,Linda M.Guineyb,Mani Rameshb,Mark C.Hersamb,C. Jeffrey Brinkerc,Sharon L.Walkerad
aDepartment of Chemical and Environmental Engineering, University of California, Riverside, CA, USA
bDepartments of Materials Science and Engineering, Chemistry, and Medicine, Northwestern University, Evanston, IL, USA
cDepartment of Chemical and Biological Engineering, University of New Mexico, Albuquerque, NM, USA
dDepartment of Civil, Architectural, and Environmental Engineering, Drexel University, Philadelphia, PA, USA
摘要:In this investigation, the utility of a static light scattering (SLS) technique to characterize aggregate morphology of two-dimensional engineered nanomaterials (2D ENMs) was systematically evaluated. The aggregation of graphene oxide (GO) and lithiated-molybdenum disulfide (Li-MoS2) were measured and compared to that of a spherical reference colloid, carboxylate-modified latex (CML) nanoparticles. The critical coagulation concentration (CCC) for all dispersions was determined via analysis of aggregation kinetics using time-resolved dynamic light scattering. This technique allowed for the elucidation of the transition from the reaction-limited aggregation (RLA) regime to diffusion-limited aggregation (DLA). The findings of this study support the aggregation trends predicted by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and recent computer simulations of aggregation kinetics. For all nanomaterials, as ionic strength increased towards the respective the CCC, fractal dimension decreased; any increase in ionic strength beyond the CCC did not yield significant change in fractal dimension. Across comparable primary particle sizes and using both carbonaceous (GO) and inorganic (Li-MoS2) 2D ENMs, this study further supports the use of SLS for the measurement of fractal dimension for 2D materials. To further support this claim, the aggregate morphology of GO in both RLA and DLA regimes was measured via cryogenic transmission electron microscopy.
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發(fā)表之日起一周內與本網聯(lián)系,否則視為放棄相關權利。