文獻名: Colloidal and polymeric contributions to the yielding of dense microgel suspensions
作者: M. A. Lara-Peñaab,A. Licea-Claveriec,I. Zapata-Gonzálezc,M. Lauratia
a Dipartimento di Chimica & CSGI, Università di Firenze, 50019 Sesto Fiorentino, Italy
b División de Ciencias e Ingenierías, Universidad de Guanajuato, 37150 León, Mexico
c Centro de Graduados e Investigación en Química del Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, 22500 Tijuana, Mexico
摘要:
Hypothesis
Soft microgel colloids can be densely packed since particle networks can compress and interpenetrate. This evolution of the particle’s internal structure associated with packing is expected to determine the linear viscoelastic properties and the yielding behavior of dense suspensions of microgel colloids.
Experiments
We investigated the volume fraction-dependent linear and non-linear rheological response of suspensions of soft core-shell particles formed by a poly(N-isopropylacrylamide) (PNIPAM) microgel core and a thin poly(ethylene glycol) (PEG) shell.
Findings
The linear viscoelasticity of suspensions reveals a transition from a fluid to a jammed glass state. Increasing volume fraction within the jammed state, the linear storage modulus and the yield stress show distinct regimes associated with the evolution of particle contacts, which involve progressive compression and interpenetration of the shell and core. The yielding of jammed suspensions occurs in two-steps: At small strains jammed cages are rearranged, while full disentanglement of interpenetrating networks only occurs at large deformations and results in fluidization. Yield strains and stresses increase with increasing shear rate or frequency, suggesting a progressive dominance of the timescale associated with shear over that associated with the internal dynamics of the system.
關鍵詞:
相關產品
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。