今天我們江蘇滑觸線廠家小編給大家介紹的是管式滑觸線的構成：
Today, we Ji'nan sliding touch line manufacturers to introduce a small series of pipe type sliding touch line:
管式滑觸線在機械工程生活中，經常用到，但是很多朋友只會用，但不夠了解，在此重慶天寶公司將為大家簡單的介紹下管式滑觸線的構成。管式滑觸線構成相對于單極滑觸線來說，附件更少，構成也更簡單，管式滑觸線作為滑觸線類型中的一部分，了解管式滑觸線，對于行車行使流程的掌握，也是很重要的一部分，他能讓我們正確的使用和維護管式滑觸線，延長他們的使用壽命，節(jié)約生產成本。
Tube type sliding contact line in mechanical engineering in life, frequently used, but a lot of friends will only use, but not enough to understand, in the Chongqing Tianbao company will introduce you a simple tubular sliding contact line. Tube type sliding contact line pose relative to the unipolar sliding contact line is, less attachment and its structure is also more simple, tube type sliding contact line as sliding contact line type in a part of, understand the tube type sliding contact line, to master driving exercise process, is also a very important part, he can let us correct use and maintenance of tube type sliding contact line and prolong their service life, saving production costs.
提掛架：是用來固定管式滑觸線的位置，提掛架的一頭連接角鋼支架，一頭連接管式滑觸線。
Lift rack: is used for fixing pipe type sliding contact line position, rack one end of the connecting angle bracket, a connecting pipe type sliding contact line.
管式滑觸線：主要的配件有集電器、螺栓、接頭護套、提掛架、端頭護套、角鋼支架、撥叉、信號指示燈等配件。
Tube type sliding contact line: the main parts collector, bolts, joint sheath, rack, end sheath, angle bracket, a shifting fork, a signal indication lamp etc. parts.
端頭護套：是連接每一根滑線的端頭，用來保持滑線的絕緣性，提高安全性能。
End shield: the end of each line is connected to the end, used to maintain the insulation of the line, improve safety performance.
接頭護套：是用來連接每一段的滑線，常規(guī)上滑線以6米一根。這樣每一根都是通過接頭護套連接起來。
Joint sheath: is used to connect each section of the slide line, conventional sliding line to 6 meters a. So that every root is connected through the joint sheath.
撥叉：可能很多人對撥叉不是很了解，其實滑觸線撥叉使用來固定集電器的，撥叉一段卡住集電器，一段連接行車，有點類似于單極集電器支架。
Fork: a lot of people may not be very understanding of the fork, in fact, the use of sliding touch line fork to fix a set of electrical appliances, a fork in a set of electrical appliances, a section of the connection, a point similar to the unipolar set of electrical support.
滑觸線集電器和單極集電器不同，這種管式滑觸線集電器上面有滑塊和集電器外殼構成，滑塊的多少由滑線的極數決定。一般滑塊都為銅滑塊。角鋼支架和單極滑觸線角鋼支架一樣，也是分那幾種類型，在這里就不再講解了。信號指示燈主要用來顯示電流運行情況，保持行車正常運轉。
The sliding contact line collector and the single pole electric appliance are different, and the tube type sliding contact line collector is composed of a sliding block and a set of electric shell, and the number of the sliding block is determined by the number of the sliding line. The general slider is copper slide. Angle bracket and monopole sliding contact line angle bracket, it is divided into several types, here is no longer on the. Signal indicator is mainly used to display the current situation, to maintain the normal operation of the road.